ZWO M54 Sensor Plate Adjuster

Step 1. Use a hex wrench to remove the three M3 screws on the adapter.

Step 2. Next, disassemble the sensor tilt plate from the camera.

Step 3. Place the base of the M54-Tilter onto the cooled camera. Fix them with six 5*6Phillips flat-head screws.

Step 4. Lastly, place the top cover of the M54 tilter onto the camera. Turn them over and fix the base and top cover with three M3 screws. Please do align the screws to the M3 screw holes. The angle between each two M3 screws should be 120.

Technical Specifications

In the Box

• Six M2.5 countersunk screws

• One M54 tilter

Manuals & Warranty

ZWO 2-Years Warranty

ZWO General Product & Software Manuals